monitors

A few weeks after the Behringer monitors had arrived I learned of the mating subwoofer, Behringer’s B2092A. This was also a comparable bargain, so I bought two. Yes, stereo subwoofers. Such decadence.

The B2092A is beautiful in a way that many people will not appreciate. It’s a device built to a task with little concern for superficial things like aesthetics. It’s a 4th order double-tuned bandpass enclosure housing two long throw 8” drivers, their amplifier and crossover electronics. The built-in amp provides 360 watts rms below 80Hz with a range of adjustments to compensate for level and placement in the room.

Speakers + Amps = Powered Monitors

Powered monitors make sense for a lot of reasons. Except for very small models they are generally bi-amped, with an active line level crossover filter dividing the high & low frequencies before the amplifier stage. Then a separate amplifier is provided for each driver. In the case of Behringer’s B2031A, there is 150 watts for the woofer and 75 watts for the tweeter.

This approach allows the designer to tailor each amplifier design to suit the specific driver in question. Amplifier/driver interaction is one of the more complicated things in audio reproduction and optimization here can bring big performance improvements. With the amps right in the cabinets there’s effectively no speaker leads to further complicate the amp/driver relationship.