An Analog Phone For Our Front Gate: Done Deal!

While I ordered the DoorBell Fone back in August the fact of our extreme Houston summer kept me from completing the installation. The buried wire run out to our gate was broken and there was just no way I was going to bury a new wire in 100+ degree heat. This past weekend I was able to find the time and temperature to complete the installation.

The largest task was to completely replace the wiring from the central closet in our house out to the gate. I replaced the old-skool solid copper pair with a length of Cat-5 cable. Using Cat-5 is a bit of future-proofing. It means that I can change to a POE-powered network device at the gate without replacing the cable again.

For the moment I’m using only one pair from the Cat-5 wiring, connecting the DoorBell Fone remote unit to the controller in the wiring closet. The total cable length is about 80 feet.

Continue reading “An Analog Phone For Our Front Gate: Done Deal!”

An Analog Phone For Our Front Gate

DoorBellFone-250 A short while ago I briefed you on my years-long search and utterly frustrating search for the perfect, affordable, SIP/IP-based door phone, preferably with video. Having set aside that lofty goal, I resigned myself to retain primarily the “affordable” aspect of the prior set of specifications, which lead me to look for an analog door phone.

There are many analog door phones available from companies like 2N, Adtran, Avaya, Bogen, NEC, Panasonic, Valcom & Viking, just to name a few. For my project, based upon some advice from friends, I settled upon Door Bell Fon as a suitable choice.

As a vendor I selected Home Controls since they had inventory, a good price, and seemed to have some experience with the product. My order included the DP28C control module, a DP38 NBZF door station and DP38 BXFS surface mount box. The total cost was right around $300.

Continue reading “An Analog Phone For Our Front Gate”