Site icon Graves On SOHO Technology

No Jitter’s Matt Brunk: SIP Means Change

nortel_lo_ip_phone_1120e copyEarlier this week Matt Brunk penned a post over at CMP’s No Jitter blog entitled “SIP Means Change.” It’s a short piece detailing the contrast between SIP phones, Asterisk servers and legacy proprietary equipment. In particular it dwells on the boot times of the various items. He highlights how anything that takes longer, even just a little longer, ultimately has a higher cost.

Matt points out that the older, proprietary digital phones were effectively instant-on devices compared to SIP phones. This is a little obtuse in that SIP isn’t really the culprit. It’s just a protocol. Cisco phones running SCCP would have similar boot times to SIP handsets. I presume that Nortel phones running UNISTIM would also have similar boot times.

No, the real issue here is putting intelligence in the end-points vs the traditional approach of all the smarts being in the switch. Modern IP phones are little computers and they act like it in so many ways. Some of their behaviors, like lengthy boot times, are not advantageous.

Looking past the end-points to the core systems the post further points out that the boot time for an Asterisk server can be over seven minutes. That’s certainly much longer than a traditional phone switch. This is absolutely true.

While I’d like to draw this as an issue of dedicated hardware vs open platforms, or embedded systems vs traditional servers…it’s not that simple. Some SIP phones take a considerable time to boot but it’s variable across brands, models, even firmware versions. It’d be nice to see a reference table of all the common phones and their associated boot times. But what a project that would be to undertake!

Even just looking at Asterisk systems you’re going to see a range of results across the different hardware platforms offered. Is the machine in question a traditional server or a diskless appliance? My last Asterisk system was a diskless, fanless little box drawing under 10 watts. It booted pretty quickly all things considered, but not as fast as my old Panasonic KSU.

Sure, old school hardware based systems boot up fast. But remember how that same hardware tied your hands in so many ways? It tried to lock you into one vendor. It cost a king’s ransom to maintain or expand. Then you eventually had to replace it entirely when it simply couldn’t be expanded any further.

If you want the cost and flexibility advantages of commodity hardware then you may end up living with certain disadvantages as well. But none of that is specifically about SIP.

Exit mobile version